Which 3 ways to choose solid wood office furniture are better?

 

Nowadays, people's quality of life is getting higher and higher, and the quality of life is naturally improved. So how do we choose solid wood office furniture? Solid wood office furniture has always been the mainstream of office furniture, and it has been prosperous for a long time. The price of solid wood office furniture is generally more expensive. There are a few main ways to look at solid wood office furniture.
 

1、Look at the material to make sure that the wood is the same as the label. Looking at the quality, generally good office furniture, after opening the cabinet door and drawer, the wood is dry and white, the texture is clear and clear, and the texture is tight and delicate. And those office furniture made of inferior materials cannot reach the above level. At the same time, good furniture requires that there should be no irritating odor after opening the cabinet door or drawer.
 

Look at the components, check the stress-bearing parts of the office furniture (sofa legs, columns, load-bearing bars near the ground between the columns, etc.) to ensure that there are no large knots or cracks or cracks. Check the sliding and positioning of the drawers, and open all doors and drawers to make sure they are properly installed and accessible. Pay particular attention to the joints of heavy duty office furniture components, which should be secured with screw caps. Check all the components of the office furniture using wood-based panels, make sure that they have been edge-sealed, and ensure that various accessories are installed with many pieces, and no nails are leaked or penetrated.
 

Look at the place of origin, because the moisture content of office furniture wood is affected by its place of origin, and furniture with a moisture content higher than 1% of the average moisture content in the area of ​​use will appear cracking, deformation, falling apart, warping and other phenomena, so it is best to choose It is not important to buy office furniture produced by enterprises with good drying technology, whether it is produced locally or abroad, the key is that its moisture content should be consistent with the average moisture content of the area where it is used.
 

2、 touch the surface to see if the polished surface is smooth and if there are protrusions that can hook the clothes. Touch the feet of the table, whether the feet of the stands and other parts are rough, and see if the paint on the corner office furniture is too thick.
 

3、lightly press each force point of the office furniture, such as column corners, drawers or shelf supports, etc., to test whether it is stable. Press hard on the surface of the office furniture so that the surface of the office furniture cannot be empty and the panel vibrates.
 

By grasping these points summarized by the best office furniture manufacture, you can buy solid wood office furniture with confidence, and solid wood office furniture can also be customized.